Home  > FOR OPERATORS  >  17~24dBm Dual Band Multi Selective Repeater with OMT
17~24dBm Dual Band Multi Selective Repeater with OMT
17~24dBm Dual Band Multi Selective Repeater with OMT
  • 17~24dBm Dual Band Multi Selective Repeater with OMT
  • W15T-2G1D -111

17~24dBm Dual Band Multi Selective Repeater with OMT

Product Feature:

High-quality aluminum alloy shell, good heating dissipation.

Can be controlled and monitored, via RS232 connects PC for local control, via GSM modem connects PC for remote control.

High linear design, Low interference to BTS.

Intelligent design, with built-in ALC function, ATT manually attenuation control (1db/step) function.

Coverage area up to 500-3000 m² without block or obstruct.

With the used of IF saw filter to make it good out-of-band rejection.

Dual Band Selective Repeater is an important part of the mobile net work wireless coverage construction. It mainly receives processes and amplifies RF signal, in this way extends to BTS coverage. It provides a rapid and perfect solution to solve and optimize the weak signal of houses, offices, hotels, elevators, underground parking lots and other small weak signal area.

The Repeater has ALC and ATT function, which offer the product reliability and the coverage stable signal technically. In addition, it has ALC warning directive function to let users knowing signal quality by the indicator's colour.

Indoor band selective repeater enhances consumer satisfaction greatly with its integrated design, compact size, easy engineering and rapid installation and debugging.

Indoor mini band selective repeater series is made with the characteristics of industrial aesthetic design, and thus can be installed in high-class places as a decoration.
SAW filter technology enables it to amplify only the targeted operator’s signals and reject all the others effectively, it is, therefore, an optimal solution for coverage extension.

Standard Package 
   1) DC12V/10A power supply 1PCS
   2) AC power cord (EU standard /US standard/UK standard/SA standard/China standard, etc ) 1PCS
   3) Installation kit 1PCS
   4) User manual 1PCS

Model frequency

Frequency range Uplink Downlink
EGSM/ LTE 8 880-915MHz 925-960MHz
GSM 890-915MHz 935-960MHz
DCS/ LTE 3 1710-1785MHz 1805-1880MHz
PCS/ LTE 2 1850-1910MHz 1930-1990MHz
CDMA/ LTE 5 824-849MHz 869-894MHz
WCDMA/ LTE 1 1920-1980MHz 2110-2170MHz
IDEN 806-824MHz 851-869MHz
AWS/ LTE 4 1710~1755MHz 2110~2155MHz

Electrical Specification

Items Uplink Downlink
Frequency Range GD 890 ~ 915 MHz 1710 ~ 1785 MHz 935 ~ 960 MHz 1805 ~ 1880 MHz
CP 824 ~ 849 MHz 1850 ~ 1910 MHz 869 ~ 894 MHz 1930 ~ 1990 MHz
GW 890 ~ 915 MHz 1920 ~ 1980 MHz 935 ~ 960 MHz 2110 ~ 2170 MHz
Max. Gain 65 - 70 dB 70 - 75 dB
Bandwidth available upon request (1-3 selectable bands)
Manual Gain Control 31dB in step of 1dB
Automatic Gain Control >20dB
Ripple in Band ≤3dB(Typical)
Out of Band Gain ± 400 KHz ≦ 50 dB
± 600 KHz ≦40 dB
± 1 MHz ≦ 35 dB
± 5 MHz ≦ 25 dB
Max. Input Power Without Damage 0 dBm
Output Power 15-20 dBm 17~24 dBm
Intermodulation Products 9KHz~1GHz ≦ -36 dBm ≦ -36 dBm
1GHz~12.75GHz ≦ -30 dBm ≦ -30 dBm
Spurious Emission 9KHz~1GHz ≦ -36 dBm ≦ -36 dBm
1GHz~12.75GHz ≦ -30 dBm ≦ -30 dBm
Spurious Emission Mask( WCDMA ) Complies with 3GPP TS 25.106
Modulation Accuracy( WCDMA ) Complies with 3GPP TS 25.106
Peak Code Domain Error( WCDMA ) Complies with 3GPP TS 25.106
ACRR( WCDMA ) ≥ 30dB @ ±5MHz & ±10MHz
Frequency Stability ≤0.01 ppm
Noise Figure @ max. gain ≦8 dB(Typical)
Return loss ≦-10 dB
Time Delay ≦4.5 μs
MTBF > 50000 hours
Power Supply AC: 90~265V, 50/ 60HzDC:12V 10A
Power Consumption <55W
Impedance 50 ohm
LED indication Power LED DC ON/OFF
Alarm LED Normal :Green Any Alarm Heppen:Red
Remote/ Local Control Local:Via RS232 Remote:Via CDMA Modem

Mechanical Specification

RF Connector N-Female

Power SwitchManual Gain Control Switch

Cooling Heatsink Convection cooling
Dimensions (D x W xH ) 285 * 268 * 116 (mm)
Weight < 8.5 Kg
Installation Type Wall Installation
Environment Conditions IP40
Humidity < 90%
Operating Temperature -10℃ ~ 55℃