* Specially designed to resolve the problem of weak signal inside vehicle and yacht.
* Elegant appearance, light weight, low consumption, easy installation.
* Wired connection with mobile phone, effectively improve communication quality, reduce inside radiation.
* 33dBm uplink output, extend communication distance and enhance performance remarkably at mountain area,
* forests, high building area etc.
* Support GSM900+GSM1800, CDMA800+ CDMA1900 network.
Anyone who drives knows that you may not have to worry about using mobile phone and the signal problem when driving in the city, but once you drive in the mountainous area or the suburbs with poor signal coverage, it becomes very hard with mobile communication. Mobile communication becomes intermittent and sigle-pass(You can hear them, but they cannot hear you), but the most serious is "out of the service area". Sometimes when you pull off the car and walk out of the car, the signal and the communication may be a little bit better. Or you may try to find and stand on a higher place to "get the signal". It is so hard to make phone calls when in a moving car, not hearing clearly and easy to miss some important phone calls. A major constraint of the mobile communication coverage is the restricted receiving sensitivity of the mobile base stations and lower transmit power. Users inside the car have more serious problem because the body of the car will often worsen the signal of 5-10dB.
The principle of car cell phone signal booster is to place an transponder device in the car to receive the transmitting signals of the mobile phones. The signal can be amplified 2~5W by the car booster and then transmitted to the base station through a high-gain antenna. Meanwhile, the high-gain antenna receives the weak signal of the base station. The signal is amplified and then transmitted inside the car to ensure the smooth communication for users inside the car. Suitable for buses, cars, ships and other traveling vehicles.
1) 2A car power supply 1PCS
2) User manual 1PCS
|Ripple in Band||CDMA/GSM≦6dB; DCS/PCS≦8dB|
|Max. Input Power Without Damage||25dBm||0dBm|
|Spurious Emission||9KHz~1GHz||≦ -36 dBm||≦ -36 dBm|
|1GHz~12.75GHz||≦ -30 dBm||≦ -30 dBm|
|Noise Figure @ max. gain||≦6dB(Typical)|
|MTBF||> 50000 hours|
|Power Supply||DC: 9V 10A|
|Power Consumption||< 5W|
|Input Signal Levels||5dBm or more||-80dBm or more|
|LED Indication||On: Green; Off: no light|
|Cooling||Heatsink Convection cooling|
|Dimensions (D x W xH )||93* 92 * 25 (mm)|
|Installation Type||Wall Installation|
|Operating Temperature||-10℃ ~ 55℃|