Home  > Products  > Mobile Signal Repeater  > Band Selective Repeater  >  37~43dBm Single Band Multi Selective Repeater
37~43dBm Single Band Multi Selective Repeater
37~43dBm Single Band Multi Selective Repeater
  • 37~43dBm Single Band Multi Selective Repeater
  • 37~43dBm Single Band Multi Selective Repeater
  • 37~43dBm Single Band Multi Selective Repeater
  • 37~43dBm Single Band Multi Selective Repeater

37~43dBm Single Band Multi Selective Repeater

Product Feature:




Provide quickest solution for indoor & outdoor signal weak or block zones.  

High linear design, Low interference to BTS.

Intelligent design, with built-in ALC function

Indoor coverage area up to 10000-50000 m², outdoor upto 1-5Km.

With the used of IF saw filter to make it good out-of-band rejection.

Can be controlled and monitored, via RS232 connects PC for local control, via GSM modem connects PC for remote control.

    Outdoor Repeater is an important part of the mobile network wireless coverage construction. It mainly receives processes and amplifies RF signal, in this way extends the BTS coverage.
      For most outdoor repeater layout area, generally no fiber resources but can receive the base station signal, wireless repeater can be used to solve the coverage problem.
Use of wireless repeater, should pay attention to the following points:
● To reduce interference to the donor base station and expand the coverage area, isolation of the wireless signal is particularly important, which requires the signal amplified to be more pure
● For towns or remote areas, due to the volume of teletraffic is not high, normally the required coverage is the larger the better
● In suburban areas, mainly to solve the coverage or poor call quality small area
● Coverage for residential built-up areas, considering using repeater plus branch and trunk amplifier and a small number of service antennas to cover

Outdoor repeaters offer different solutions for a variety of signal blind, weak areas.  The main application are:
● Expand the scope of services and eliminate the signal blind areas formed by, such as mountains, buildings, trees and other obstructions
● Erecting along the high way, improve coverage efficiency
● To solve the indoor coverage issues of the larger buildings which is temporarily unable to implement indoor distribution system
● Lead the signal of idle base station to the coverage area of busy base station to achieve easing the high teletraffic
● Deeply coverage in dense residential area (For those residential communities with many high-rise residential buildings, indoor coverage should be considered in)
● Due to terrain reasons, the base station signal is not directly covered and the use efficiency is low, etc



Standard Package    

1) AC power supply (EU standard/ US standard/UK standard/ SA standard/China standard etc) 1PCS
2) Installation kit 1PCS
3) User manual 1PCS

Model frequency

Frequency rangeUplinkDownlink
EGSM/ LTE 8880-915MHz925-960MHz
GSM890-915MHz935-960MHz
DCS/ LTE 31710-1785MHz1805-1880MHz
PCS/ LTE 21850-1910MHz1930-1990MHz
CDMA/ LTE 5824-849MHz869-894MHz
WCDMA/ LTE 11920-1980MHz2110-2170MHz
IDEN806-824MHz851-869MHz
AWS/ LTE 41710~1755MHz2110~2155MHz


Electrical Specification

ItemsUplinkDownlink
Frequency RangeCDMA800 & GSM850824 ~ 849 MHz 869 ~ 894 MHz 
GSM900890 ~ 915 MHz 935 ~ 960 MHz 
DCS1710 ~ 1785 MHz 1805 ~ 1880 MHz 
PCS1850 ~ 1910 MHz1930 ~ 1990 MHz
WCDMA1920 ~ 1980 MHz2110 ~ 2170 MHz
Max. Gain85~90 dB90~ 95 dB
Bandwidthavailable upon request (1-3 selectable bands)
Manual Gain Control31dB in step of 1dB
Automatic Gain Control>20dB
Ripple in Band≤3dB(Typical)
Out of Band Gain± 400 KHz ≦ 20 dB
± 600 KHz ≦30 dB
± 1 MHz ≦ 40 dB
± 5 MHz ≦ 50 dB
Max. Input Power Without Damage0 dBm
Output Power26~37 dBm37~43 dBm
Intermodulation Products9KHz~1GHz≦ -45 dBm≦ -45 dBm
1GHz~12.75GHz≦ -45 dBm≦ -45 dBm
Spurious Emission9KHz~1GHz≦ -36 dBm≦ -36 dBm
1GHz~12.75GHz≦ -30 dBm≦ -30 dBm
Spurious Emission Mask( WCDMA )Complies with 3GPP TS 25.106
Modulation Accuracy( WCDMA )Complies with 3GPP TS 25.106
Peak Code Domain Error( WCDMA )Complies with 3GPP TS 25.106
ACRR( WCDMA )≥ 30dB @ ±5MHz & ±10MHz
Frequency Stability≤0.01 ppm
Noise Figure @ max. gain≦5 dB(Typical)
Return loss≦-14 dB
Time Delay≦4.5 μs
MTBF> 50000 hours
Power SupplyAC: 90~265V, 50/ 60Hz;
Power Consumption< 150W
Impedance50 ohm

LED indication

Power LED

DC ON/OFF

Alarm LED

Normal :Green ; Any Alarm Happen: Red

Remote/Local Control

Local:Via RS232 ; Remote:Via wireless Modem


Mechanical Specification

RF ConnectorN-Female
Switch

Power SwitchManual Gain Control Switch

CoolingHeatsink Convection cooling
Dimensions (D x W xH )400 * 550 * 215 (mm)
Weight< 27 Kg
Installation TypeWall Installation
Environment ConditionsIP65
Humidity< 90%
Operating Temperature-10℃ ~ 55℃
Product Message

Loading verification code...

Please complete verification first

社媒暂无评论
Contact