Home  > FOR OPERATORS  >  S33T Series Single Band Digital Repeater
S33T Series Single Band Digital Repeater
S33T Series Single Band Digital Repeater
  • S33T Series Single Band Digital Repeater

S33T Series Single Band Digital Repeater

Product Feature:


* High-quality aluminum alloy shell, good heating dissipation.
* Alarm LED indication.
* AGC function special for electric fans.
* Manual gain attenuation, with 1dB step to attenuate the gain among 1-30dB range.
* ALC could limit the output power to ensure stable coverage.
* Support 3 sub-bands and each bandwidth is with maximum 24MHz.
* Can be controlled and monitored, via RS232 connects PC for local control, via GSM modem connects PC for remote control.

Amplitec S27T series digital mobile signal repeater is used to extend mobile providers' networks. These repeater are  cellular solutions with easy installation, which enable operators to improve signal coverage without establishing new BTS. The repeater is adjusted strictly to the bandwidth at which mobile provider performs. It support 3 sub-bands and up to 12 channels per customer’s request. In case it’s necessary to change the band frequency, the user can easily do it thanks to the SDR technology in the digital repeater.
The repeater has Digital IF SAW filter technology. Support 3 sub-bands and each bandwidth is with maximum 24MHz.
It can upgrade the underlying FPGA code with the help of the upper software to change the frequency-selecting and band-selecting mode, and it also can make a flexible configuration to the parameters, such as the operation bandwidth and so on.

It can be controlled and monitored, via RS232 connecting PC for local control, via GSM modem connecting PC for remote control, set the frequency and ATT of UL or DL, check the output power of UL or DL, and check the temperature alarm and ALC alarm via the OMT.

Standard Package  

   1)
AC power cord (EU standard/ US standard/ UK standard/ SA standard/ China standard etc.)  1PCS 
   2) Installation kit 1PCS 
   3) User manual 1PCS
                   

Items Uplink Downlink
Frequency Range 1850 ~ 1915 MHz 1930 ~ 1995 MHz
Working Bandwidth (Frequency can be set by software) 0.2~24 MHz(in steps of 200 KHz) 0.2~24 MHz(in steps of 200 KHz)
Number of sub-band 1~3 1~3
Output Power   24±2 dBm 33±2 dBm
Gain 75±3 dB 80±3 dB
Ripple Type≤4 dB Type≤4 dB
VSWR ≤2 ≤2
Intermodulation Products(CW) ≤ -45dBc ≤ -36dBc
Spurious Emission 9KHz~1GHz ≤ -36dBm 
1GHz~12.75GHz ≤ -30dBm 
ALC Active 10dB ∣△∣≤2dB ∣△∣≤2dB
Max. Input Power Without Damage  -10dBm -10dBm
ATT step of 1dB  1 ~ 10dB ∣△∣≤1dB ∣△∣≤1dB
10 ~ 20dB ∣△∣≤1dB ∣△∣≤1dB
20 ~ 30dB ∣△∣≤1.5dB ∣△∣≤1.5dB
Out of Band Gain ± 600 KHz ≤50 dB ≤50 dB
± 1 MHz ≤35 dB ≤35 dB
± 5 MHz ≤25 dB ≤25 dB
Noise Figure @ max. gain ≤6 dB ≤6 dB
Time Delay ≤13 μs ≤13 μs
Alarm ALC not Active Green
ALC Active 5~10dB Orange
ALC Active 15~20dB Red
Power LED Power ON Green
Power OFF No Light
Local Control Or Remote Control 1.UL&DL Gain
2. Frequency
Monitoring and control Local  RS232
Remote GSM Modem
 RF Connector N-Female
Environment Conditions IP40
Power Supply AC220V
Power Consumption ≤100W
Humidity < 90%
Operating Temperature  -10℃~+55℃ 
Size 450*340*195mm
Weight 21Kg
Product Message

Loading verification code...

Please complete verification first

社媒暂无评论
Contact