Home  > Products  > Mobile Signal Repeater  > Band Selective Repeater  >  17~24dBm Dual Band Multi Selective Repeater with OMT
17~24dBm Dual Band Multi Selective Repeater with OMT
17~24dBm Dual Band Multi Selective Repeater with OMT
  • 17~24dBm Dual Band Multi Selective Repeater with OMT
  • 17~24dBm Dual Band Multi Selective Repeater with OMT
  • 17~24dBm Dual Band Multi Selective Repeater with OMT
  • 17~24dBm Dual Band Multi Selective Repeater with OMT

17~24dBm Dual Band Multi Selective Repeater with OMT

Product Feature:


High-quality aluminum alloy shell, good heating dissipation.

Can be controlled and monitored, via RS232 connects PC for local control, via GSM modem connects PC for remote control.

High linear design, Low interference to BTS.

Intelligent design, with built-in ALC function, ATT manually attenuation control (1db/step) function.

Coverage area up to 500-3000 m² without block or obstruct.

With the used of IF saw filter to make it good out-of-band rejection.


Dual Band Selective Repeater is an important part of the mobile net work wireless coverage construction. It mainly receives processes and amplifies RF signal, in this way extends to BTS coverage. It provides a rapid and perfect solution to solve and optimize the weak signal of houses, offices, hotels, elevators, underground parking lots and other small weak signal area.


The Repeater has ALC and ATT function, which offer the product reliability and the coverage stable signal technically. In addition, it has ALC warning directive function to let users knowing signal quality by the indicator's colour.


Indoor band selective repeater enhances consumer satisfaction greatly with its integrated design, compact size, easy engineering and rapid installation and debugging.


Indoor mini band selective repeater series is made with the characteristics of industrial aesthetic design, and thus can be installed in high-class places as a decoration.
SAW filter technology enables it to amplify only the targeted operator’s signals and reject all the others effectively, it is, therefore, an optimal solution for coverage extension.




Standard Package 
   1) DC12V/10A power supply 1PCS
   2) AC power cord (EU standard /US standard/UK standard/SA standard/China standard, etc ) 1PCS
   3) Installation kit 1PCS
   4) User manual 1PCS
                   

Model frequency

Frequency rangeUplinkDownlink
EGSM/ LTE 8880-915MHz925-960MHz
GSM890-915MHz935-960MHz
DCS/ LTE 31710-1785MHz1805-1880MHz
PCS/ LTE 21850-1910MHz1930-1990MHz
CDMA/ LTE 5824-849MHz869-894MHz
WCDMA/ LTE 11920-1980MHz2110-2170MHz
IDEN806-824MHz851-869MHz
AWS/ LTE 41710~1755MHz2110~2155MHz


Electrical Specification

ItemsUplinkDownlink
Frequency RangeGD890 ~ 915 MHz 1710 ~ 1785 MHz935 ~ 960 MHz 1805 ~ 1880 MHz
CP824 ~ 849 MHz 1850 ~ 1910 MHz869 ~ 894 MHz 1930 ~ 1990 MHz
GW890 ~ 915 MHz 1920 ~ 1980 MHz935 ~ 960 MHz 2110 ~ 2170 MHz
Max. Gain65 - 70 dB70 - 75 dB
Bandwidthavailable upon request (1-3 selectable bands)
Manual Gain Control31dB in step of 1dB
Automatic Gain Control>20dB
Ripple in Band≤3dB(Typical)
Out of Band Gain± 400 KHz ≦ 50 dB
± 600 KHz ≦40 dB
± 1 MHz ≦ 35 dB
± 5 MHz ≦ 25 dB
Max. Input Power Without Damage0 dBm
Output Power15-20 dBm17~24 dBm
Intermodulation Products9KHz~1GHz≦ -36 dBm≦ -36 dBm
1GHz~12.75GHz≦ -30 dBm≦ -30 dBm
Spurious Emission9KHz~1GHz≦ -36 dBm≦ -36 dBm
1GHz~12.75GHz≦ -30 dBm≦ -30 dBm
Spurious Emission Mask( WCDMA )Complies with 3GPP TS 25.106
Modulation Accuracy( WCDMA )Complies with 3GPP TS 25.106
Peak Code Domain Error( WCDMA )Complies with 3GPP TS 25.106
ACRR( WCDMA )≥ 30dB @ ±5MHz & ±10MHz
Frequency Stability≤0.01 ppm
Noise Figure @ max. gain≦8 dB(Typical)
Return loss≦-10 dB
Time Delay≦4.5 μs
MTBF> 50000 hours
Power SupplyAC: 90~265V, 50/ 60HzDC:12V 10A
Power Consumption<55W
Impedance50 ohm
LED indicationPower LEDDC ON/OFF
Alarm LEDNormal :Green Any Alarm Heppen:Red
Remote/ Local ControlLocal:Via RS232 Remote:Via CDMA Modem


Mechanical Specification

RF ConnectorN-Female
Switch

Power SwitchManual Gain Control Switch    

CoolingHeatsink Convection cooling
Dimensions (D x W xH )285 * 268 * 116 (mm)
Weight< 8.5 Kg
Installation TypeWall Installation
Environment ConditionsIP40
Humidity< 90%
Operating Temperature-10℃ ~ 55℃



Product Message

Loading verification code...

Please complete verification first

社媒暂无评论
Contact