Home  > Products  > Mobile Signal Repeater  > Band Selective Repeater  >  20~24 dBm Triple Band Selective Repeater with OMT
20~24 dBm Triple Band Selective Repeater with OMT
20~24 dBm Triple Band Selective Repeater with OMT
  • 20~24 dBm Triple Band Selective Repeater with OMT
  • W20T-3.jpg
  • W20T-2.jpg
  • W20T-4.jpg

20~24 dBm Triple Band Selective Repeater with OMT

Product Feature:



Working in GSM900+GSM1800+WCDMA triple band.

Can be controlled and monitored, via RS232 connects PC for local control, via GSM modem connects PC for remote control.

High linear design, Low interference to BTS.

Intelligent design, with built-in ALC function, ATT manually attenuation control (1db/step) function.

Coverage area up to 300-2000 m² without block or obstruct.

With the used of IF saw filter to make it good out-of-band rejection.

      In mobile communication, it is inevitable that macro-cell coverage cannot cover weak or dead zones; to use repeater is a good choice in these areas. Indoor repeaters mainly applied in covering small blind and weak zones.
Indoor repeater is a good choice for VIP rooms, offices, houses, restaurants, apartments, parking lots, etc.
     Indoor repeater enhances consumer satisfaction greatly with its integrated design, compact size, easy engineering and rapid installation and debugging 
     And this repeater is made with the characteristics of industrial aesthetic design, thus can be installed in high-class places as a decoration.
     IF SAW filter technology enables it to amplify only the targeted operator’s signals and reject all the others’ effectively, it is, therefore, an optimal solution for coverage extension.




Standard Package 
1) DC12V/10A power supply 1PCS
2) AC power cord (EU standard/ US standard/UK standard/ SA standard/China standard, etc) 1PCS

3) Installation kit 1PCS
4) User Manual 1PCS

                   

Model frequency

Frequency range

UplinkDownlink
EGSM/ LTE 8880-915MHz925-960MHz
GSM890-915MHz935-960MHz
DCS/ LTE 31710-1785MHz1805-1880MHz
PCS/ LTE 21850-1910MHz1930-1990MHz
CDMA/ LTE 5824-849MHz869-894MHz
WCDMA/ LTE 11920-1980MHz2110-2170MHz
IDEN806-824MHz851-869MHz
AWS/ LTE 41710~1755MHz2110~2155MHz

Electrical Specification


ItemsUplinkDownlink
Frequency RangeGDW890 ~ 915 MHz/1710 ~ 1785 MHz935 ~ 960 MHz/1805 ~ 1880 MHz
1920 ~ 1980 MHz2110 ~ 2170 MHz
2G1D1W890 ~ 915 MHz (2 bands)935 ~ 960 MHz (2 bands)
1710 ~ 1785 MHz/1920 ~ 1980 MHz1805 ~ 1880 MHz/2110 ~ 2170 MHz
Max.Gain60 ~ 70 dB60  ~ 70 dB
Bandwidthavailable upon request
Manual Gain Control31dB in step of 1dB
Automatic Gain Control> 20dB
Ripple in Band≤3dB(Typical)
Out of Band Gain± 400 KHz ≦ 50 dB
± 600 KHz ≦40 dB
± 1 MHz ≦ 35 dB
± 5 MHz ≦ 25 dB
Max. Input Power Without Damage0 dBm
Output Power15 ~ 17 dBm20 ~ 24 dBm
Intermodulation Products9KHz~1GHz≦ -36 dBm≦ -36 dBm
1GHz~12.75GHz≦ -30 dBm≦ -30 dBm
Spurious Emission9KHz~1GHz≦ -36 dBm≦ -36 dBm
1GHz~12.75GHz≦ -30 dBm≦ -30 dBm
Spurious Emission Mask( WCDMA )Complies with 3GPP TS 25.106
Modulation Accuracy( WCDMA )Complies with 3GPP TS 25.106
Peak Code Domain Error( WCDMA )Complies with 3GPP TS 25.106
ACRR( WCDMA )≥ 30dB @ ±5MHz & ±10MHz
Frequency Stability≤0.01 ppm
Noise Figure @ max. gain≦8 dB(Typical)
Return loss≦-10 dB
Time Delay≦4.5 μs
MTBF> 50000 hours
Power SupplyAC: 90~265V, 50/ 60Hz;DC: 9V 10A
Power Consumption< 65W
Impedance50 ohm
Input Signal LevelNormalAt the edge of green and orange ( -50dBm or more)
LowGreen
High>1-5dB range: Orange; >20dB: Red


Mechanical Specification

RF ConnectorN-Female
Switch

Power SwitchManual Gain Control Switch

CoolingHeatsink Convection cooling
Dimensions (D x W xH )300 * 268 * 116 (mm)
Weight< 9 Kg
Installation TypeWall Installation
Environment ConditionsIP40
Humidity< 90%
Operating Temperature-10℃ ~ 55℃
Product Message

Loading verification code...

Please complete verification first

社媒暂无评论
Contact