*Mobile phone APP Bluetooth connection device viewing and adjusting gain.
*Low power consumption, low interference.
*Multiple users supported up to 20.
*Quality metal construction, strong and durable.
*Good heat dissipation for longevity.
*With LCD display, can shows working frequency, output power, Gain.
*Self-adaptive operating system with powerful CPU.
*ALC could limit the output power to ensure stable coverage.
*Manual gain attenuation, with 1dB steep to attenuate the gain among 1-31dB range.
The Amplitec C23S-A APP series Solution is suitable for small place which has 4-6 rooms, with 73dB Gain,it can support ultra wide band including 2G,3G,4G and improve your cell phone signal level, In mobile communication, it is inevitable that macro-cell coverage cannot cover weak or dead zones. To use a repeater is a good choice in these areas. This wide band repeaters mainly applied in covering small blind and weak zones.
1) AC90-264V, DC12V/2A power supply adapter 1PCS
2) AC power cord (EU standard/ US standard/ UK standard/ SA standard/ China standard etc.) 1PCS
3) Installation kit 1PCS
4) User manual 1PCS
880 ~ 915/1710 ~ 1785 MHz
925 ~ 960/1805 ~ 1880MHz
880 ~ 915/1920 ~ 1980 MHz
925 ~ 960/2110 ~ 2170MHz
1710 ~ 1785/1920 ~ 1980 MHz
1805 ~ 1880/2110 ~ 2170MHz
880 ~ 915/830 ~ 862 MHz
925 ~ 960/791 ~ 821 MHz
824 ~ 849/1850 ~ 1910 MHz
869 ~ 894/1930 ~ 1990MHz
Ripple in Band
CDMA≤8 dB / EGSM≤15 dB / DCS≤10 dB /PCS≤10 dB / WCDMA≤6 dB
1 ~ 10dB
10 ~ 20dB
20 ~ 30dB
ALC active @10dB, output power error
Auto Turn-off Function(test @ max gain)
When devices is under idle mode, gradually strengthen the input signal. When uplink input >-90dBm, device’s uplink PA will be immediately turned on
Self Oscillation & Over Input Power Alarm
If ATT+ALC>20 & ALC>0, uplink PA will be auto turned off in 5s and AGC ALARM will be shown; device will auto reboot in 30±5s. If it fail after rebooting for 5 times continuously, device will be auto turned off until restarting
If ATT+ALC>20 & ALC>0, auto turn off uplink PA in 5s, auto attenuate 31dB downlink gain and AGC ALARM will be shown. device will auto reboot in 30±5s, If it fail after rebooting for 5 times continuously, device will be auto turned off until restarting
-10℃ ~ +55℃